- EMI/RFI Products
- Shielding Gaskets and Tapes
- EMI Grounding Washers
- Shielded Ventilation Panels
- Conductive Silicone
- EMI Shielded Windows
- Board Level Shields
- Thermal Management Materials
- Absorber Materials
Thermal Management Material 6001
This material is ultra soft and can be applied to irregular surfaces. It incorporates a self adhesive backing for use in general to high altitude and high vibration applications.
This product exhibits good thermal conductivity to effectively conduct heat away from sensitive components to the heat sink.
Being electrically insulating, this thermal conductive material can be applied to electrical devices exhibiting high voltages.
|Thickness||0.3 – 15||mm||ASTM D374|
|Hardness||5.0+/-3||Shore A||ASTM D2240|
|Specific Gravity||1.94 +/-0.2||g/cm3||ASTM D792|
|Elongation||0.2 +/-1.02||%||ASTM D412|
|Tensile Strength||66.4 +/-5||Kgf/cm2||ASTM D412|
|Weight Loss||<1||%||@204oC/24 hr.|
|Dielectric Breakdown (V)||>10||KV||ASTM D149|
|Surface Resistance||2.61×1013||Ohm||ASTM D257|
|Temperature Continuous||-50 to +220||oC||–|
|Thermal Conductivity||1.7||W/m-k||ASTM D5470|
Test Sample Thickness: 1.50mm
Thermal Resistance vs. Pressure (Gray)
The 6001 material provides low thermal impedance; with increasing pressure, thermal impedance becomes lower.
Deflection vs. Pressure (Black)
The 6001 material exhibits high deflection (softness); as pressure increases the deflection percentage increases.